• Hazard/Risk Category (HRC) 2
• Arc Thermal Protective Value (ATPV) 9.5 cal/cm2
• CAN/CGSB 155.20-2000 (Canadian FR standard, workwear protection against flash fire)
• TPP with spacer average 12.4 cal/cm2
• TPP without spacer average 10.7cal/cm2
• ASTM F1506-10a (Performance spec for textiles used in clothing exposed to electrical arc and thermal hazards)
• Double-needle stitching on reflective tape
• Bar-tacked at all stress points
• All metal thermally protected from the skin
• Protective shirt collar
• Storm guard over front zipper with snap closure
• Action back for mobility and elasticized waist sides
• Adjustable wrists and ankles
• One flap chest patch pocket on the right, with YKK snap closure
• Two waist patch pockets with side access
• Two rear hip patch pockets
• Tool pocket on the right leg

MEETS	MEETS

• Total compliance with the newest CSA standard: CSA Z96-15; Orange and Lime meet Class 2 Level 2 and Black and Navy meet Class 1 level 2
• Total compliance with the newest ANSI standard: ANSI 107-2015; Orange and Lime meet Type R  Class 2 and Black and Navy meet Type 0 Class 1
• 100% polyester Tricot body
• Snap front closure
• Radio/phone pocket on chest
• Two radio/phone clip straps
• Cooling underarm mesh vents
• Back ruler storage slot
• Large back pack pouch with zipper access
• Four front pockets with brass grommets and pen pockets
• Seven other outer and inner all-purpose storage pockets
• D-ring access slot
  
  

ORANGE MEETS	ORANGE MEETS

• Double-dipped coating for durability
• Waterproof full dip flat latex
• Palm dip foam latex crinkle coat for optimal grip
• Lightweight liner allows for dexterity and flexibility
• Knit wrist for a good fit
• Meets EN388 3141X

• 14" gauntlet glove provides wrist and forearm protection
• Sandy finish on palm for enhanced grip
• Fully coated PVC exterior provides tested chemical resistance
• Fully dipped
• High-Visibility TPR
• Acrylic terry brushed liner
• Cut resistant
• Coating/TPR: 100% PVC
• EN374-1 Type A - AKLOPT
• EN388 - 32328
• ANSI CUT A6
• ANSI PUNCT 4 

Applications

• Mining
• Sheet Metal
• Oil & Gas Industry
• Petro Chemical
• Refineries
• Agriculture

• Fingerless glove with Pop-top mitten
  
• 100% Acrylic with a fleece lining
• 40 grams of 3M™ Thinsulate™ Insulation
  
• Elastic wrist, ribbed cuff

• Fingerless glove with Pop-top mitten
• Oatmeal 5-Gauge Rag Wool
• Ragg wool keeps hands warm and repels moisture
• 40 grams of 3M™ Thinsulate™ Insulation
• Split leather palm patch
• Elastic wrist

• Hook and Loop fasteners on shoulders, sides and front
• 100% polyester fabric
• Features retroreflective stripes
• Vest: 32” chest measurement,
• 19” Length at the highest point
• One size fits most
  
  

LIME MEETS

• Soft foam for maximum comfort
• Taper Fit
• High noise reduction
• 10 Pair per box

• Fully adjustable
• Lightweight
• Compact design
• Sturdy construction
• NNR 26 / CSA Z94.2. Class A

• Yardwork
• Workshop
• Power tools

• 100% polyester tricot front body
• 100% polyester rice mesh back body
• Zipper front closure
• Two upper front patch pockets
• Two lower front cargo flap pockets, two radio clips on upper chest

ORANGE MEETS	ORANGE MEETS

• 100% polyester light-weight tricot knit is perfect for summer jobs that still require a long pant
• Vented at the knees
• 2-way side leg zips accommodate work boots
• Back patch pockets
• Elastic waistband with cinch

• 300D Polyester oxford fabric with mechanical stretch
• Anti-abrasive black nylon on sleeves
• Quilt-lined
• Detachable hood
• Water resistant bonded layer
• Inner patch and zipper pockets
• Storm flap front
• Waterproof front and sleeve pockets
• Angled comfort wrist with inner sleeve
• Total compliance with the newest CSA standard: CSA Z96-22; Orange meets Class 2 Level 2

ORANGE MEETS	ORANGE MEETS

• Reflective tape with contrast backing in 4" configuration
• 80% polyester, 20% cotton
• Heavy-duty two-way metal front zip
• Storm guard over front zipper with snaps closure
• 1 flap chest patch pocket on right with snap closure
• 1 upper chest pocket
• 2 waist slant pockets with side access
• 2 rear hip patch pockets
• Action back for mobility
• Side elasticized waist
• Adjustable wrists and ankles
• Knee height metal side leg zips
• Tool pocket on right leg
• Total compliance with the newest CSA standard: CSA Z96-22; Orange meets Class 3 Level 2

• 100% Polyester 300D Oxford fabric with padded quilt lining
• Waterproof zippers
• Zip and flap pockets at back
• Elastic and snap waist
• Adjustable side leg zippers
• Side cargo pocket reinforced knees
• Meets CSA Z96-22 Class 3, Level 2 when worn with a Class 2 Level 2 jacket with arm bands

• The hand-conforming soft 4-way stretch material ensures excellent dexterity while wearing gloves.
• The heating elements in these gloves warm the blood as it circulates over the back of the hand.
• The extended cuff effectively prevents drafts or snow from entering the glove.
• Two DC rechargeable Li-ION Poly batteries are included, providing up to 4.5 hours of heat on the low setting.

• Premium water-repellent goatskin leather palm and fingertips with black elastic shell
• Extended gauntlet style cuff with adjustable wrist strap and snug-fitting drawstring closure
• Three heating levels powered by two 7.4V lithium-polymer batteries
• Heated zones on the side of fingers
• 3M ™ Thinsulate C100 insulation.
• HIPORA® waterproof and breathable liner keeping hands dry
• Includes: (2) lithium-polymer batteries (7.4V, 2100mAh)
• Battery charger included