Orange FR Treated 100% Cotton Coverall with Reflective Tape
Request Info
024-FRCOR-40
Regular price
72 in stock
Class 1 Level FR - CSA Z96-15
- Hazard/Risk Category (HRC) 2
- Arc Thermal Protective Value (ATPV) 12.5 cal/cm2
- CAN/CGSB 155.20-2000 (Canadian FR standard, workwear protection against flash fire)
- Thermal Protective Performance (TPP) value: with spacer 11, contact test 8.2
- ASTM F1506-10a (Performance spec for textiles used in clothing exposed to electrical arc and thermal hazards)
- NFPA 70E (Standard for electrical safety in the workplace)
- 100% 10 oz. Pre-shrunk cotton, FR treated, twill weave
- 100% Polyester FR thread
- Heavy duty # 5 FR brass zipper on aramid tape
- 2" reflective with 4" contrast FR retroreflective tape in CSA configuration
- Double-needle stitching on reflective tape
- Bar-tacked at all stress points
- All metal thermally protected from the skin
- Protective shirt collar
- Storm guard over front zipper with snap closure
- Action back for mobility and elasticized waist sides
- Adjustable wrists and ankles
- 1 flap chest patch pocket on right, with YKK snap closure
- 2 waist patch pockets with side access
- 2 rear hip patch pockets
- Tool pocket on the right leg
 |
FR Flame & Arc Resistant Long Sleeve Tee Shirt HRC2
Request Info
022-FRLSOR-S
Regular price
$92.50
Sale price
49 in stock
Class 1 Level FR - CSA Z96-15
This tee is is constructed from flame-resistant fabrics and components. It resists ignition and will not continue to burn when removed from the ignition source.
- 100% FR treated 7 oz./yd² (240 gsm) cotton Interlock
- 4” (10cm) Flame-resistant Retro-reflective safety tape
- Sewn with aramid thread
- Preshrunk fabric
- Chest pocket
- Soft finish for comfort
- 100% Polyester FR thread
MEETS:
- HRC 2-APTV 8.5 Cal/cm²
- CSA Z96-09 Class 1, Level FR
- Can/CGSB-155.20-2000
- TPP (with spacer) 9.5 Cal/cm² average
- TPP (contact test) 8.5 Cal/cm² average
| ORANGE MEETS |
|
Meets CGSB 155.20.2000 For Flame Resistance
FR Treated 100% Cotton Coverall with Reflective Tape
Request Info
024-FRCBU-40
Regular price
158 in stock
Class 1 Level FR - CSA Z96-15
- Hazard/Risk Category (HRC) 2
- Arc Thermal Protective Value (ATPV) 12.5 cal/cm2
- CAN/CGSB 155.20-2000 (Canadian FR standard, workwear protection against flash fire)
- Thermal Protective Performance (TPP) value: with spacer 11, contact test 8.2
- ASTM F1506-10a (Performance spec for textiles used in clothing exposed to electrical arc and thermal hazards)
- NFPA 70E (Standard for electrical safety in workplace)
- 100% 10 oz. Pre-shrunk Cotton, FR treated, twill weave
- 100% Polyester FR thread
- Heavy duty # 5 FR brass zipper on aramid tape
- 2" FR retroreflective tape in CSA configuration
- Double needle stitching on reflective tape
- Bar-tacked at all stress points
- All metal thermally protected from the skin
- Protective shirt collar
- Storm guard over front zipper with snap closure
- Action back for mobility and elasticized waist sides
- Adjustable wrists and ankles
- 1 flap chest patch pocket on right, with YKK snap closure
- 2 waist patch pockets with side access
- 2 rear hip patch pockets
- Tool pocket on right leg
|
Leather Welding Jacket
Request Info
024-90302
Regular price
37 in stock
- Sidesplit cowhide
- Riveted Kevlar-sewn seams
- Reinforced snap front
- Inside pocket
- Adjustable snap cuffs
FR Hoodie, with Detachable Hood
Request Info
024-P844FRBK-S
Regular price
119 in stock
Class 2 Level FR - CSA Z96-15
Need a flame resistant garment that will keep you warm and visible? Look no further. Encompassing all FR standards this hoodie will ensure you are safe, comfortable and compliant.- Meets CGSB 155.20, 2000
- HRC2
- Arc rating:atpv =20.9 cal/cm2
- ASTM F1506 and NFPA 70E
- Material meets the requirements of NFPA2112-2012 ULcertified
- 100 % cotton 12 oz. fr treated fabric
- Aramid high tenacity FR thread
- Bar-tacked at all stress points
- Adjustable drawstring around hood
- One-way #5 resin zipper on aramid tape
- FR rib knit cuff & waistband
- Removable snap hood
- FR silver retroreflective tape
| BLACK MEETS |
|
3-Piece Yellow PVC Rainsuit with Fire Resistant Coating
Request Info
023-50001FR
Regular price
$14.90
Sale price
37 in stock
It's just like the regular PVC rain suit, except FANCY, and by fancy, we mean FR Coated.
- Jacket and bib material is wind & waterproof
- The jacket has a vented back, so you don't get too hot
- Detachable snap hood
- Bib pant has adjustable shoulder straps
- Cut for comfort in the seat
- Snap fly
- Meets CGSB standard 155.20.2000 for flame resistance
- *CFIA accepted for use with food contact
Lightweight Fire Resistant (FR) Hi Vis Safety Rain Jacket with Snap-Off Hood
Request Info
023-60551
Regular price
126 in stock
Class 2 Level FR - CSA Z96-15
Probably the most functional garment you can find. This water-resistant (up to 8000mm)and a windproof hi-vis safety rain jacket is made of a lightweight polyurethane shell. This allows the user to stay warm and dry while feeling like they are wearing as little as a summer nylon anorak. Did we mention it is fire resistant, in accordance with the CGSB Type 3 standard. Whether you are working on steamship lines or construction sites, this is the best choice for a waterproof rain jacket that meets CGSB fire resistance and CSA hi-vis standards.Features:
- 50mm Fluorescent PU Flame-resistant material with 8000mm Water Resistance
- 2" Heat transfer reflective stripes on front and back
- Waterproof, heat-sealed with welded seams
- Vented underarms, elastic storm cuffs
- Fold-away hood with visor
- Adjustable drawstring on hood
- Front zipper closure and storm flap
- 2 Front snap pockets
- Inner cell phone pocket
- CAN/CGSB 155.20 - 2000 Type 3
- ASTM D6413 / D6413M
- CSA Z96-15 Class 2 Level 2 (Class 3 Level 2 when worn together with the bib overalls)
- Class 2 Level FR
| ORANGE MEETS | WITH BIB OVERALL MEETS |
 |
 |
Lightweight Fire Resistant (FR) Hi Vis Safety Rain Overalls
Request Info
023-60501
Regular price
56 in stock
Class 2 Level FR - CSA Z96-15
The bib overalls to accompany the most functional garment.Features:
- 50mm Fluorescent PU Flame-resistant material with 8000mm Water Resistance
- 2" Heat transfer reflective stripes on legs
- Waterproof, heat-sealed with welded seams
- CAN/CGSB 155.20 - 2000 Type 3
- ASTM D6413 / D6413M
- CSA Z96-15 Class 3 Level 2 when worn together with the rain jacket
- Class 2 Level FR
| ORANGE MEETS | WITH RAIN JACKET MEETS |
|
|
Fire Resistant (FR) 5-Point Tear-away Hi Vis Safety Vest
Request Info
022-TVFR5OR-S/M
Regular price
531 in stock
Class 2 Level 2 - CSA Z96-15
- FR treated 100% polyester mesh
- Meets EN ISO 14116 Index 1
- Meets CSA Z96-15 Class 2 Level 2
- This garment should be worn over an FR long-sleeved garment
- Retroreflective tape in 4" contrast fluorescent configuration
- 5 point tear-away
- Extra-strong edging tape
- D-ring access slot
- 3 inches of adjustable size in the front
- This garment is constructed from flame-resistant fabrics and components, resists ignition, and will not continue to burn when removed from the ignition source. Designed for continuous wear.
| ORANGE MEETS |
 |
Fire Resistant (FR) Cotton Duck Hi Vis Safety Vest
Request Info
022-TVFR158BK-S
Regular price
122 in stock
Stand out after nightfall and shield yourself against fire. Like bullet-proof clothing for law enforcement, our flame-resistant safety vest defends against ignition and supplies you with the technology needed to perform your job more safely. Keep your essentials close by with integrated pockets and pen slots that give you the ability to stay prepared for any scenario.
- 100% FR treated preshrunk 10 oz.(350 gsm) cotton duck
- Meets: HRC 2- APTV 12 Cal/cm
- CSA Z96-15 Class 1 Level FR
- CAN/CGSB-155.20-2000
- NFPA2112
- TPP(with spacer) 10.4 Cal/cm Average
- TPP(contact test) 8.3 Cal/cm Average
- This garment should be worn over an FR long-sleeved garment
- Retroreflective tape in 4" contrast fluorescent configuration
- Double snap-adjustable front closure
- 2 inner, 2 outer, 1 cell phone, and multiple pen slots pockets
- D-ring access slot
- Double radio clip tabs
- This garment is constructed from flame-resistant fabrics and components, resists ignition, and will not continue to burn when removed from the ignition source. Designed for continuous wear.
| BLACK MEETS |
|
