• Reflective tape with contrast backing in 4" configuration
• 80% polyester, 20% cotton, 300GSM in twill weave
• Heavy-duty two-way metal front zip
• Storm guard over front zipper with snap closure
• 1 flap chest patch pocket on right with snap closure
• 1 upper chest pocket
• 2 waist slant pockets with side access
• 2 rear hip patch pockets
• Action back for mobility
• Side elasticized waist
• Adjustable wrists and ankles
• Knee height metal side leg zips
• Tool pocket on right leg

ORANGE MEETS

• Total compliance with the newest CSA standard: CSA Z96-15; Orange and Lime meet Class 2 Level 2 and Black and Navy meet Class 1 level 2
• Total compliance with the newest ANSI standard: ANSI 107-2015; Orange and Lime meet Type R  Class 3 and Black and Navy meet Type 0 Class 1
• Shell: Fluorescent 100% polyester ripstop fabric, polyurethane coated. Tear-resistant, water-resistant (up to 5000mm), and windproof, featuring fully seam-sealed construction.
• Lining: 5.9oz. (200 g/m) 100% polyester insulation Hip Length
• Four large front cargo pockets with velcro closure
• Clear ID pocket pulls out of upper right front chest pocket
• Heavy-duty two-way front zip with snap closure storm flap
• Three-piece snap-off hood with drawstring
• Rib-knit storm cuffs
• Upper arm pen and tool pocket
• Inner device pocket
• Retroreflective silver tape in 4" contrast fluorescent configuration
  
  

ORANGE & LIME MEET	BLACK & NAVY MEETS

ORANGE & LIME MEET	BLACK & NAVY MEETS

• Same tried and true fabric as our original, with improved design for better performance on the job
• New cuff design for less bulk
• New dropped back hem
• Shaped three-piece snap-off hood
• 100% polyester Sherpa fleece liner.
• Total compliance with the newest CSA standard: CSA Z96-15; Orange meets Class 2 Level 2, and Black meets Class 1 level 2
• Total compliance with the newest ANSI standard: ANSI 107-2015; Orange meets Type R  Class 3, and Black meets Type 0 Class 1

ORANGE MEETS	BLACK MEETS

ORANGE MEETS	BLACK MEETS

• Total compliance with the newest CSA standard: CSA Z96-15; Orange and Lime meet Class 2 Level 2 and Black meets Class 1 level 2
• Total compliance with the newest ANSI standard: ANSI 107-2015; Orange and Lime meet Type R  Class 3 and Black meets Type 0 Class 1
• 100% polyester bonded softshell, 360 g/m
• Lining: 100 g/m polyfill insulation
• Reflective tape in 10cm contrast fluorescent configuration
• Breathable and water-resistant
• Two-way zip front with snap closure storm flap and chafe-free chin guard
• 3 front zipper pockets
• 2 inside pockets
• Velcro adjustable cuffs
• 3 piece fully lined snap-off hood with drawstring
• Comfort fleece lined collar
• Drop-back hem for warmth
• To best meet CSA Z96-15 standard, detach the hood when it is in the lowered position
• Colour availability: Orange, Lime, and Black
• Size range: S to 5XL

ORANGE & LIME MEET	BLACK MEETS

ORANGE & LIME MEET	BLACK MEETS

• 100% polyester flannel shell, quilt-lined for warmth with 5 oz. polyester insulation
• Spring-loaded front snap closure
• Six pockets: four outer, two inner
• Pencil slot and hanger loop in collar
• Adjustable snap cuffs
• Garment-within-a-garment construction

When so many accidents happen as the result of low-visibility, a safety sash serves as one of the most sensible and effective solutions for roadwork or traffic-related tasks at any hour of the day.  When worn over your own clothing, the Hi Vis traffic safety sash conveniently offers many of the same visibility benefits as our other items of safety apparel. Simple to pack and store and wear at a moment’s notice, this is a worthwhile addition to the workday of any individual looking to remain visible and exercise the appropriate safety measures.

• Premium 1.5" elastic
• Adjustable elastic waist band and chest straps
• Silver reflective strip
• High quality front release buckle

• Total compliance with the newest CSA standard: CSA Z96-15; Orange and Lime meet Class 2 Level 2 and Black and Navy meet Class 1 level 2
• Total compliance with the newest ANSI standard: ANSI 107-2015; Orange and Lime meet Type R  Class 2 and Black and Blue meet Type 0 Class 1
• 100% polyester tricot front
• 100% polyester mesh back
• Zipper front closure
• Retroreflective tape in 4" contrast fluorescent configuration
• Padded collar for comfort and to prevent chafing
• 2 upper front patch pockets
• 2 lower front cargo pockets
• 2 radio clip tabs on the upper chest

S/M 35"-40" Chest measurement fits S/M
L/XL 42"-48" Chest measurement fits L/XL
2XL/3XL 50"-56" Chest measurement fits 2XL / 3XL

ORANGE & LIME MEET	BLACK & BLUE MEET

ORANGE & LIME MEET	BLACK & BLUE MEETS

• 100% polyester tricot body
• Radio clip, cell pocket, id pocket
• Front snap fastening
• Two lower velcro closure pockets
• Retroreflective tape in 4" contrast fluorescent configuration

ORANGE MEETS

• Reflective tape with contrast backing in 4" configuration
• 80% polyester, 20% cotton, 300GSM in twill weave
• Heavy-duty adjustable elastic shoulder straps
• Heavy-duty two-way metal front zip
• Storm guard over front zipper with snap closure
• 2 chest patch pockets
• 1 upper chest pocket
• 2 waist slant pockets with side access
• 2 rear hip patch pockets
• Adjustable wrists and ankles
• Knee height metal side leg zips
• Tool pocket on right leg
• Tool loop
  
  

ORANGE MEETS

Long-wearing, low fading hi-vis safety tee, for those work conditions that call for long sleeves. Breathable and comfortable.

• Total compliance with the newest CSA standard: CSA Z96-15; Orange and Lime meet Class 2 Level 2 and Black and Navy meet Class 1 level 2
• Total compliance with the newest ANSI standard: ANSI 107-2015; Orange and Lime meet Type R  Class 3 and Black and Navy meet Type 0 Class 1
• V-neck, long sleeves
• Front chest pocket
• 100% polyester bird_s eye knit fabric is comfortable against the skin and wicks away moisture and perspiration
• Retro-reflective silver tape in 4" contrast fluorescent configuration

ORANGE & LIME MEET	BLACK & NAVY MEET

ORANGE & LIME MEET	BLACK  & NAVY MEETS

• Total compliance with the newest CSA standard: CSA Z96-15; Orange and Lime meet Class 2 Level 2 and Black and Navy meet Class 1 Level 2
• Total compliance with the newest ANSI standard: ANSI 107-2015; Orange and Lime meet Type R  Class 2 and Black and Navy meet Type 0 Class 1
• V-neck and short-sleeves
• Front chest pocket
• 100% polyester birdseye knit fabric is comfortable against the skin and wicks away moisture and perspiration
• Retroreflective silver tape in 4" contrast fluorescent configuration

ORANGE & LIME MEET	BLACK & NAVY MEET

ORANGE & LIME MEET	BLACK & NAVY MEETS

The Hi-Vis Waterproof Long Rain Coat provides unbeatable protection with tough 450D polyester, fully-taped seams, and 8000mm waterproof rating. Equipped with radio clips, adjustable cuffs, vented underarms, and removable hood, it’s built for maximum comfort and visibility—keeping you dry and productive in extreme conditions.

• 450D, 100% polyester Oxford PU
• 8000mm Waterproof rating
• Fully taped seams
• 2 Shoulder radio clips
• 2 Front flap pockets with loop and hook closure
• Removable fold-away drawstring hood
• Front zip and snap closure
• Mesh fabric lining
• Vented underarms

LIME MEETS	LIME MEETS

• Shell: Fluorescent 100% polyester ripstop fabric, polyurethane coated. Tear-resistant, waterproof (5000 mm) and windproof, featuring fully seam-sealed construction.
• Features tape across back and chest, improving visibility
• Side entry pocket, two front slash pockets and two back patch pockets
• Tool loop
• Heavy-duty adjustable elastic shoulder straps are riveted for durability
• Elastic back waist
• Hip height side-leg zips (new)
• Retroreflective tape in 4" contrast fluorescent configuration

ORANGE & LIME MEET	BLACK & NAVY MEET

• Shell: Fluorescent 100% polyester ripstop fabric, polyurethane coated. Tear-resistant, waterproof (5000 mm) and windproof, featuring fully seam-sealed construction.
• Features tape across back and chest, improving visibility
• Side entry pocket, two front slash pockets and two back patch pockets
• Tool loop
• Heavy-duty adjustable elastic shoulder straps are riveted for durability
• Elastic back waist
• Hip height side-leg zips
• Retroreflective tape in 4" contrast fluorescent configuration
  
  

LIME MEET	LIME MEET

Built for extreme work conditions, these flame-resistant ripstop pants offer waterproof protection, flexible performance, and smart storage. Featuring sealed seams, tool-ready pockets, knee-pad slots, and click-on belt loops. Elastic waistband, boot zips, and reflective tape add comfort, safety, and functionality—ideal for demanding industrial environments and harsh weather conditions.

• Fabric: FR-treated (Flame-Resistant) 300 denier ripstop polyester with a PU coating for durability and weather resistance.
  
• Seams: Seam-sealed to ensure the pants are waterproof and windproof.
• Flexibility: Designed to be flexible and practical for work environments.
• Waistband: Elastic waist with broad belt tunnels and a fully detachable back for added comfort and customization.
• Pockets:
  • Two front pockets with storm flaps for protection.
  • Back and thigh pockets, also with storm flaps for weather resistance.
  • Ruler pocket for easy access to tools.
  • Internal knee-pad pockets for additional protection.
• Belt Loops: Includes belt loops with a click-on function for attaching accessories.
• Boot Zippers: Zippers at the boots with storm flaps and Velcro closures to keep the cuffs in place and off the ground.
• Reflective Tape: High-contrast reflective tape for enhanced visibility and safety compliance.
  
  

LIMITED FIRE RESISTANCE

This garment has been tested in accordance with the test method CAN/CGSB-4.2 No.27.10 & ASTM D6413 Flame Resistance, Self Extinguishing for Momentary Contact with Open Flame. In contact with flame, this garment will resist ignition, and /or self-extinguish. The intended use of the garment is for protection from liquids including water, oil, light acids, and caustics. This garment also provides wind resistance and acts as a thermal layer against harsh elements, while providing increased visibility of the wearer. This garment is not intended as protection from hydrocarbon flash fires, electric arc hazards, or welding sparks.

Built for tough conditions, this FR-treated ripstop jacket offers waterproof, windproof protection with seam-sealed construction. Features include a fleece-lined collar, adjustable waist and cuffs, heavy-duty zippers, multiple weather-protected pockets, reflective tape for visibility, and compliance patches—delivering warmth, safety, and functionality with room for custom branding.

• Fabric: FR-treated (Flame-Resistant) 300 denier ripstop polyester with PU coating for durability and weather protection.
• Seams: Seam-sealed to ensure the jacket is waterproof and windproof.
• Waist: Inside waist adjustment for a customizable fit.
• Zipper: Heavy-duty two-way zipper for functionality and durability.
• Embroidery Zipper: Inside embroidery zipper for custom branding or logos.
• Pockets:
  • Inside pocket for secure storage.
  • Two front zip and button pockets with storm flaps for weather protection.
• Collar: Fleece-lined collar for extra warmth and comfort.
• Cuffs: Adjustable storm cuffs to keep out wind and water.
• Patches: FR rating and winter rating patches on the arm and front of the jacket for safety compliance.
• Drop-back Seat: Extended coverage in the back for additional protection.
• Reflective Tape: High-contrast reflective tape for enhanced visibility and compliance with safety standards.
  
  

LIMITED FIRE RESISTANCE

This garment has been tested in accordance with the test method CAN/CGSB-4.2 No.27.10 & ASTM D6413 Flame Resistance, Self Extinguishing for Momentary Contact with Open Flame. In contact with flame, this garment will resist ignition, and /or self-extinguish. The intended use of the garment is for protection from liquids including water, oil, light acids, and caustics. This garment also provides wind resistance and acts as a thermal layer against harsh elements, while providing increased visibility of the wearer. This garment is not intended as protection from hydrocarbon flash fires, electric arc hazards, or welding sparks.

BLACK MEETS	BLACK MEETS

Designed for extreme cold, these FR-treated bibs are perfect for hazardous environments. Rated for -50°C, they provide warmth with 250 gsm insulation, waterproof seams, and reflective tape for visibility. With durable riveted straps, multiple storm-flap pockets, tool loops, and side-leg zippers, they ensure practicality, protection, and comfort in the harshest conditions.

• Fabric: FR-treated (Flame-Resistant) 300 denier ripstop polyester with a PU coating for durability and weather resistance.
• Cold Rating: Heavy-duty with a cold rating of -50 degrees, suitable for extreme conditions.
• Insulation: Heavy-weight 250 gsm insulation for superior warmth.
• Seams: Seam-sealed to ensure waterproof and windproof protection.
• Visibility: Reflective tape across the back and chest for improved visibility.
• Pockets:
  • Side entry pocket for convenience.
  • Two front slash pockets and two back patch pockets for storage.
  • Tool loop for carrying tools.
• Shoulder Straps: Heavy-duty adjustable elastic shoulder straps, riveted for durability.
• Waist: Elastic back waist for comfort and flexibility.
• Zippers: Hip-height side-leg zippers for easy access.
• Reflective Tape: High-contrast reflective tape for enhanced visibility and compliance.

LIMITED FIRE RESISTANCE

This garment has been tested in accordance with the test method CAN/CGSB-4.2 No.27.10 & ASTM D6413 Flame Resistance, Self Extinguishing for Momentary Contact with Open Flame. In contact with flame, this garment will resist ignition, and /or self-extinguish. The intended use of the garment is for protection from liquids including water, oil, light acids, and caustics. This garment also provides wind resistance and acts as a thermal layer against harsh elements, while providing increased visibility of the wearer. This garment is not intended as protection from hydrocarbon flash fires, electric arc hazards, or welding sparks.

ORANGE MEETS	ORANGE MEETS